To not answer an incoming call by opening the phone, see Answer
mode, p.38.
2.
Press
Tip: Press + or – to temporarily switch off the ring signal.
Call information
During a call, the outgoing or incoming phone number and the elapsed call
time is displayed. If the identity of the caller is withheld or unknown, Pri-
vate or Unknown are displayed.
Call options
Mute
During a call, press
mute to re-enable the microphone.
Loudspeaker
During a call, press the right softkey Speaker to activate loudspeaker
mode. Speak clearly into the phone microphone at a maximum distance of
1 m. Press the right softkey Speaker to deactivate loudspeaker mode.
Options
During a call the options button ( ) give access to additional functions.
Add call to call another number. When the second party is connected
•
you can again press
Merge calls/Split call conference to merge the two calls into a
•
conference call and then split them again if needed.
Swap to swap between the two calls.
•
Transfer to merge the two calls and disconnect yourself.
•
Hold call/Retrieve call to hold/retrieve the current call.
•
Mute to disable the microphone. See above.
•
•
End single call to end the current call (same as
•
End all calls to end all current calls.
Note! For settings related to calling, see Calls, p.36
to end the call.
Mute to disable the microphone. Press
and then press:
English
12
Un-
).