Sony CLM-V55 Operating Instructions Manual page 19

Note
¦ ˎ
When attaching to a camera that has an accessory shoe, read the
ˎ ˎ
instruction manual of the camera too.
Notes
¦ ˎ
If using a camera equipped with a pop-up built-in flash, be careful of the
ˎ ˎ
following:
Always close the built-in flash of the camera. If your camera has a built-in auto
ˋ ˎ
flash function, turn that function off.
Before using the flash, remove this unit from the camera.
ˋ ˎ
Make sure this unit is firmly fixed to the camera before use to prevent
ˎ ˎ
this unit from falling during shooting.
5
Connect this unit to the camera with the HDMI cable
supplied.
Tip
¼ ˎ
If the cable is not long enough, use a Sony HDMI cable Type A-TypeC (not
ˎ ˎ
supplied).
6
Turn on the power to the camera and this unit.
The viewfinder image of the camera is displayed on the LCD screen of this
unit. If your camera has an HDMI output setting function, set it to AUTO or
16:9.
continued
19-GB