Advertisement
Work with OBS
Select Device
After download and installation, double click
OBS Studio icon on desktop to run OBS.
Click icon + under Sources window at the
bottom left of OSB panel, and select Video
Capture Device. Click OK in the new pop-up
window. You also can insert a name you want
to create for the device.
One window will appear you after above.
Please click the drop-down box next to Device
and select Pyle CameraLink PLINK2.
Video Setting
You should get the video in window. If you want to set the video resolution,
click the drop-down box next to Resolution/FPS Type and select Custom, then
click the drop-down box next Resolution to select one resolution.
After you set the resolution to 3840 x 2160, and you change the video source,
and the resolution of video source is smaller than 3840 x 2160, such as 1920 x
1080, the software will not display the video and you will see Check Resolutions
Settings on the window.
Now you need to set resolution to 1920 x 1080 or smaller resolution, then you
will see the video on the window.
If resolutions of video source and device output are 3840 x 2160, you may nd
that the viewing picture is way out of the frame of OBS. Right click image window
of OBS, select Resize output (source size), and you will get the whole picture.
You can click the drop-down box next to FPS to select the appropriate FPS - 30,
60, Highest FPS, or Match Output FPS, and click the drop-down box next to
Video Format to select the video format -XRGB, NV12, or YUY2.
3
www.PyleUSA.com
Advertisement
