Table of Contents
Advertisement
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to: EN60436 ), send an email
to:
info.test@dishwasher-production.com
6. BASIC SETTINGS
You can configure the appliance by
changing basic settings according to
your needs.
Number Settings
1
2
3
4
5
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in
setting mode.
When the appliance is in setting mode,
the indicators on the control panel
represent available settings. For each
setting, a dedicated indicator flashes:
Values
Water hardness From level 1 to
level 10 (de‐
fault: 5)
Rinse aid level
From level 0 to
level 8 (default:
5)
End sound
On
Off (default)
Auto door open
On (default)
Off
Key tones
On (default)
Off
4 5
1
3
2
In your request, include the product
number code (PNC) from the rating plate.
For any other questions regarding your
dishwasher, refer to the service book
provided with your appliance.
1)
Description
Adjust the level of the water softener ac‐
cording to the water hardness in your area.
Adjust the level of the rinse aid according
to the necessary dosage.
Activate or deactivate the acoustic signal
for the end of a programme.
Activate or deactivate the AirDry.
Activate or deactivate the sound of the but‐
tons when pressed.
6.1 Setting mode
How to enter setting mode
You can enter setting mode before
starting a programme. You cannot enter
setting mode while the programme is
running.
To enter setting mode, press and hold
simultaneously
about 3 seconds.
• The light related to
indicator
flash.
• The indicators
are on.
• The lights related to MY TIME
selection bar are on.
ENGLISH
9
and
for
and the
,
,
and
Advertisement
Table of Contents
