Related Manuals for Stat-X 30E
Summary of Contents for Stat-X 30E
- Page 1 Electric Generator Owner’s Manual Version 1.2.5 August 2021 P/N 19001 Fireaway Inc. 5852 Baker Road • Minnetonka,MN 55345...
-
Page 2: System Description
In addition, the aerosol has • Materials, which burn with deep-seated characteristics space savings over conventional systems. Stat-X systems are a high obscuration factor. US EPA has approved Stat-X for use as (wood, fiber, cotton, etc.) designed for total flooding applications in accordance with... -
Page 3: Equipment Installation
General. All Stat-X generators must be installed to facilitate proper aerosol flow and distribution is extremely important as each at close range at the wall, ceiling, or vertical surfaces of the smaller aerosol generators may be more suitable. -
Page 4: Operation
2. Proceed to the appropriate remote manual/electrical release 7. All acceptance testing shall be in accordance with this Stat-X generators as part of a suppression system: It is not required for the generators to be aimed at specific station for the hazard. -
Page 5: Maintenance
Stat-X Safety Data Sheet. in any landfill that handles industrial waste. However, local Stat-X generators in the event of a fire. If connected to a fire room temperature during a fire event or discharge can affect regulations must be researched and observed. -
Page 6: Limitations Of Liability
A DETAILED MANUAL MAY BE OBTAINED BY CONTACTING THE MANUFACTURER. Stat-X products are manufactured in the USA, and sold worldwide (excluding the Federation of Russian States) exclusively by Fireaway Inc. under license from R-Amtech International. Generators must never be positioned to discharge directly at each other and must be mounted in such a way as to have an unobstructed discharge path, nor discharge at close range onto walls, ceiling, or equipment. - Page 7 5852 Baker Road Minnetonka, MN 55345 U.S.A. Tel: 952-935-9745 Fax: 952-935-9757 www.statx.com ©2021 Fireaway Inc...
Need help?
Do you have a question about the 30E and is the answer not in the manual?
Questions and answers