Table of Contents
Advertisement
Quick Links
PTZ Control Testing
RS485 Data Test
Function
Monitor Output
Testing
Built-in Multimeter
Video Signal Meter
Network Cable
Tester
Up To 10 Hour
Battery Life
Essential CCTV Camera Test Monitor
The feature packed LCD330 CCTV test monitor kit comes with voltage probes for use with
the built-in multimeter, an RS485 data test cable, a 12V DC power cable so that cameras can
be powered by the test monitor during confi guration, a short BNC cable for connecting test
monitor to cameras or monitors, sturdy nylon carry case with optional shoulder strap, neck
strap, PSU for charging the LCD330 and a network cable tester.
LCD330 Instruction Book
LCD330
Advertisement
Table of Contents
Related Manuals for CCTVMATE.COM LCD330
Summary of Contents for CCTVMATE.COM LCD330
- Page 1 Battery Life Essential CCTV Camera Test Monitor The feature packed LCD330 CCTV test monitor kit comes with voltage probes for use with the built-in multimeter, an RS485 data test cable, a 12V DC power cable so that cameras can be powered by the test monitor during confi guration, a short BNC cable for connecting test monitor to cameras or monitors, sturdy nylon carry case with optional shoulder strap, neck strap, PSU for charging the LCD330 and a network cable tester.
-
Page 2: Table Of Contents
Do not use the test monitor in damp, humid or leaking Video Testing gas environments. Do not touch the LCD330 with moist or wet hands. PTZ Testing & Control Measurements may be incorrect when the CCTV test monitor is used in places subjected to strong magnetic Video Signal Analysis fields or electromagnetic waves. -
Page 3: Getting Started
LCD330 Instruction Book Getting Started Before taking the CCTVmate out on its fi rst job, please ensure that the unit is fully charged by using the charger supplied. For more information on charging the device see the ‘Battery & Power’ section on page Connections &... - Page 4 LCD330 Instruction Book Side 1 Power On / Off Power Input UTP (RJ45) Socket Power switch. 9V DC jack input. UTP socket for network cable testing. Side 2 RS232 Port 12V DC Output Fold-out Stand For confi guration and For powering 12V DC cameras Optional fold-away stand.
-
Page 5: Kit Contents
Powering 12V Cameras The LCD330 features a 12V DC output so that cameras can be powered by the test monitor. Video Signal Meter 9V DC PSU... -
Page 6: Battery & Power
The fi rmware version and serial number of the product are displayed at the bottom of the screen. Using The LCD330 When On Charge You can still use all the features of the LCD330 whilst it is on charge except the multimeter function. -
Page 7: System Information
Protocol Press ‘Left’ again to fi nish setup. The menu items will stop Set the protocol of the LCD330 so that it matches that of the fl ashing once setup is complete. PTZ camera you wish to control. Available protocols: 7. -
Page 8: Video Testing
600mA or less 12V DC cameras which draw can be powered by the LCD330 with the 2.1mm power cable supplied. For more information on powering cameras with the LCD330 see page The locations of the LCD330’s connections are highlighted on page 4. -
Page 9: Ptz Testing & Control
PTZ you will need to set the protocol, communication method and baud rate of the LCD330 so that they match those of the target PTZ. The protocol, communication method and baud rate can be adjusted in the ‘System... -
Page 10: Video Signal Analysis
Press the ‘OPEN/SET’ button to confi rm selection and the ‘CLOSE/CLEAR’ button to cancel or exit current menu. To achieve true readings the LCD330 must be connected in-line with a 75Ω load or a DVR on the cable. Exiting PTZ Test... -
Page 11: Utp (Network) Cable Testing
Using The Video Signal Analysis Function The fi rst column shows the 8 terminations in order from 1 to 8 in the end of the cable which is plugged into the LCD330. At the main menu press ‘2’ to enter ‘VIDEO AND PTZ... -
Page 12: Video Generator
Plug one end of the cable into the ‘UTP TEST’ port on the right hand side of the LCD330. Plug the other end of the network cable into the Network Cable Tester. The locations of the LCD330’s connections are highlighted on page 4. -
Page 13: Rs485 Data Testing
1 second. The device will beep twice and connected to terminal ‘B’ . display the main menu. The locations of the LCD330’s connections are highlighted on Note: The Video Generator function is intended for testing page composite monitors. Trying to display the video on... -
Page 14: Digital Multimeter
AC voltage and resistance. Note: Before the RS485 data test will function correctly the baud rate of the LCD330 needs to match that of the PTZ control equipment. For instructions on setting the baud rate of the test monitor see page At the main menu press ‘5’... -
Page 15: 12V Dc Power Output
Digital Multimeter Continued 12V DC Power Output Connection Example The LCD330 has a useful 12V DC power output for powering 12V CCTV cameras and equipment. The LDC330 can provide 12V DC power up to a maximum current of 600mA. Powering Cameras With The LCD330... -
Page 16: Specification & Warranty
340g Warranty www.cctvmate.com For service and support please contact the original supplier from which the LCD330 was purchased or visit All specifications are approximate. We reserve the right to change any product This symbol on the products and/or accompanying documents specifications or features without notice.