Table of Contents
Advertisement
Quick Links
Instruction
Manual
HD-TVI, CVI, AHD,
Analogue & IP CCTV
Test Monitor
The LCD400K professional CCTV test monitor is
capable of testing, configuring and controlling
HD-TVI, CVI, AHD, analogue and IP cameras.
It features a full Qwerty keyboard, ONVIF 16
compatibility, a 1080p HD 4 inch screen and
up the coax control.
LCD400K Instruction
Manual
xLCD400K v1
Advertisement
Table of Contents
Related Manuals for CCTVMATE.COM LCD400K
Summary of Contents for CCTVMATE.COM LCD400K
- Page 1 Manual HD-TVI, CVI, AHD, Analogue & IP CCTV Test Monitor The LCD400K professional CCTV test monitor is capable of testing, configuring and controlling HD-TVI, CVI, AHD, analogue and IP cameras. It features a full Qwerty keyboard, ONVIF 16 compatibility, a 1080p HD 4 inch screen and up the coax control.
- Page 2 Introduction Safety Information The comprehensive LCD400K all-in-one CCTV test monitor has been designed with CCTV installers in mind so that it is as useful and user friendly as possible. To obtain the maximum benefi ts from the CCTVmate LCD test monitor, it is recommended It’s compatible with HD-TVI, CVI, AHD, IP and analogue...
-
Page 3: Table Of Contents
Contents Key Features Accessories Connections & Controls Keyboard Basic Operation Battery & Recharging Powering Cameras ONVIF Test Analogue Camera Test & RS485 Control Analogue Video Generator RJ45 Cable TDR Test Network Tools Record Playback Settings Upgrading Firmware Transferring Files Over FTP Other Products To Consider Specification Manual Ref: xLCD400K... -
Page 4: Key Features
Key Features TVI, CVI, AHD, IP & Analogue Full Qwerty Keyboard The comprehensive LCD400K is capable of testing Quick and easy IP addressing and networking. TVI, CVI, AHD, IP and analogue equipment. Built-in Torch ONVIF 2 Compatible Handy when working in dark environments such as Compatible with all the latest IP Cameras. -
Page 5: Accessories
Accessories (Included) Spare Terminal Block BNC - BNC Lead 2.1mm DC Power Lead Carry Case & Shoulder Strap USB - Mini USB Lead RS485 Test Lead Power Supply Lead Lanyard Audio Test Lead Network (Patch) Lead PoE Power Injector Phono - BNC Connectors Manual Ref: xLCD400K... -
Page 6: Connections & Controls
+ Confirm / - Cancel changes Arrow Keys PTZ movement / Navigation Secondary functions Some keys have various secondary functions. Specific secondary functions are indicated on screen depending on which operation is currently being performed. For more information visit cctvmate.com... - Page 7 Connections & Controls Feature Primary Function High Power LED LED torch BNC Video In HD, IP & analogue video in BNC Video Out HD, IP & analogue video out Network port with PoE output Network Port 1 Orange LED - PoE indicator (Blue) Green LED - Data indicator Network port with PoE input...
-
Page 8: Keyboard
Navigate around to a reduced or on screen keyboard image during live Lights up when Symbol makes text input much easier lock is on view or playback saving you time and effort. For more information visit cctvmate.com... -
Page 9: Basic Operation
Basic Operation Turning The Device On/Off Audio Testing Power Audio Test To turn the device press and hold the Turn the test monitor on and plug the Button’ until the Power Indicator lights up. Lead into the 3.5mm Audio socket on the side of the device. -
Page 10: Battery & Recharging
As the LCD400K is recharged via PoE you can Note: When the battery is inserted the test monitor recharge the device from any RJ45 socket will turn on automatically. -
Page 11: Powering Cameras
Powering Cameras One of the most convenient features of the LCD400K is Note: The maximum PoE output is 25.5W. If this is exceeded the power output which allows you to power cameras the output will be terminated automatically. using the test monitor itself. -
Page 12: Onvif Test
PoE output. Note: For more information on powering cameras using the LCD400K see page 11 - Powering Cameras. If you are connecting to a network switch this again can be connected to either network port 1 or 2. - Page 13 ONVIF Test The blue information bar relates to Network Port 1 and Packet Loss the green information bar relates to Network Port 2. Displays the success rate of data packets being transmitted across the network. The grey bar displays the IP information. There are three possible options, Static IP, DHCP request and DHCP server.
- Page 14 Test' screen. If successful the new IP address assigned by the server will be displayed in the grey bar. DHCP Server This mode enables the LCD400K to act as a DHCP server and can be used when connecting to DHCP compatible devices and networks.
- Page 15 The second step of the ONVIF Test is discovering and confi guring compatible cameras. When entering this You can save your own commonly used IP step the LCD400K will automatically search for ONVIF addresses by selecting an existing address cameras connected directly to the test monitor or on and pressing 'SET' .
- Page 16 Adding Cameras Manually add '/onvif/device_service' . -' button. To manually add a camera press the 'ZOOM When manually adding IP cameras you will need to know the camera's full IP address and ONVIF service path. For more information visit cctvmate.com...
- Page 17 ONVIF Test Video Snapshot & Information Enter the camera's user name and password then press the 'IRIS +' button to confi rm. Highlight the camera you wish to view and after a few seconds a snapshot of the camera's video will be You can press the 'FOCUS +' button to...
- Page 18 Not all settings are available for every camera. The available settings depend on the abilities of the camera connected. Here you can see camera information such as fi rmware version, serial number and URL. Find and For more information visit cctvmate.com...
- Page 19 ONVIF Test ONVIF Test 3: Video & PTZ Testing Full Screen Mode & PTZ Control In full screen mode the camera's video is made as big The third and fi nal step of the ONVIF test is video and as possible whilst maintaining the correct image ratio. PTZ testing.
- Page 20 UDP produces the resolution, bitrate, framerate and more. To choose the best images with a fast connection but which stream is displayed simply highlight it and could be unstable on slower networks. +/-' . press 'FOCUS For more information visit cctvmate.com...
-
Page 21: Analogue Camera Test & Rs485 Control
RS485 connections are made using the RS485 test lead supplied with the LCD400K. The terminal block is plugged into the RS485 socket on the right-hand side of the test monitor and the clips are connected to the camera's RS485 data wires. - Page 22 Note: When using digital zoom the test monitor automatically enters full screen mode. -' to cancel When changing values you can press 'IRIS changes to the parameter currently selected. For more information visit cctvmate.com...
- Page 23 +' to save changes and exit. adjustments on PTZ or motorised zoom cameras. The arrow keys are used to control PTZ movement. Cameras can now be configured and controlled from the LCD400K by either RS485 or coaxitron (depending on the camera's capabilities.) Press the 'IRIS +' button to display the camera's OSD menu.
-
Page 24: Analogue Video Generator
You have the option of three test images; a PM5544 test pattern, an EBU colour bar and an EIA 1956 test pattern. Each image can be generated in both PAL and NTSC video formats. For more information visit cctvmate.com... - Page 25 Analogue Video Generator Testing Transmission Equipment Cable Testing The video generator can also be used to test wireless The analogue video generator can also be used to video transmission equipment such as the VideoMitter. test BNC cables and leads. Just connect one end of Simply connect the BNC output to the transmitter the cable to the test monitor's video output and the unit and the receiver unit to the BNC input of the test...
-
Page 26: Rj45 Cable Tdr Test
Pressing the 'SET' button will start and stop the Test' . While the repeat test is running the 'Repeat The attenuation is calculated at 16MHz over LCD400K will repeatedly test both network ports. This 100m. Ideally it should be -8.5dB or less, is a great way to test multiple cables quickly. - Page 27 RJ45 Cable TDR Test Break Testing to network port 2. The test monitor will then send a signal down the cable and measure the delay at the If you suspect a cable has been damaged you can other end. The resulting delay on each core is then perform a break test.
-
Page 28: Network Tools
To stop the test press the 'FOCUS +' button again. Start by connecting the test monitor to the network switch with a patch lead to either network port 1 or 2. For more information visit cctvmate.com... - Page 29 Network Tools Note: It may take up to 60 seconds for a device to be discovered. As the test listens for any data packets it may find devices with different subnets. The test can not discover silent devices or uni-cast (point-to- point) packets.
- Page 30 To build the subnet list press the 'FOCUS -' button. The LCD400K will then start searching and listing all devices First you need to configure the IP settings as explained on the user defined subnet. The MAC address, IP address page 29.
-
Page 31: Record Playback
Record Playback One of the most useful features the LCD400K has Use the Right arrow to select a folder and the Left arrow to offer is the ability to save test recordings and to return to the previous folder. To view a file press the snapshots onto the test monitor itself. -
Page 32: Settings
Use the choose Chinese (simplified), Spanish, French, German, Left Right arrows to alter the value and then press Turkish, Russian, Hebrew, Czech, Portuguese, Romanian, 'IRIS +' to save changes. Serbian, Polish, Finnish, Japanese or Farsi. For more information visit cctvmate.com... - Page 33 Backlight System Upgrade Set the brightness of the LCD400Ks's backlit display. Used to update the firmware on the LCD400K. For a full Brighter backlights are easier to view however they will step by step guide on updating firmware see page also reduce battery run time as they require more power.
-
Page 34: Upgrading Firmware
Upgrading Firmware We sometimes add new features to the LCD400K in a One of three messages will then be displayed: continued effort to make the test monitor as great 'Found New Version Software' - Press 'FOCUS a tool as possible. -
Page 35: Transferring Files Over Ftp
Transferring Files Over FTP The LCD400K has a built in FTP server which is great for sharing test images. Users can access the test monitor’s internal storage to retrieve test fi les from any PC on the same network as the test monitor. -
Page 36: Other Products To Consider
New "Hexa" Tech (6 in 1 compatibility) ZipStor can add 4 extra drives TVI, CVI, AHD, Analogue, IP & Rapid Deploy P2P - Easy QR Code port forwarding ZipDVR.com Simply scan the ZipDVR’s QR code with a smart phone For more information visit cctvmate.com... - Page 37 Other Products To Consider 3pc BNC Crimps BNC Crimp Tool Our best selling BNC crimps allow you to make your own cables to the exact length you need at a fraction of the price of pre Sturdy metal construction made cables. designed to crimp any BNC.
- Page 38 - up to 40TB !! Built in Smart PoE Switch ZipStor can add 4 extra drives Powers PoE cameras connected to the NVR Built in Autodetect & Autocon gure ZipNVR.com For the easiest possible install! For more information visit cctvmate.com...
- Page 39 Other Products To Consider RJ45 Crimps Crimp Tool • Easy to see wire order • 3 In 1 - Crimp tool, cable cutters & Strippers • No worry about wire length in crimp • For use with the Rapid Fit RJ45 plugs •...
-
Page 40: Specification
Specification Video Inputs 150 / 300 / 600 / 1200 / 4800 / (HD-TVI, CVI, AHD & Analogue) Baudrate 9600 / 19200 Video In Connection Screen 4" TFT Backlit 16.7M Colour Video Outputs (1080P HD-TVI, CIV, AHD - PAL/NTSC) Resolution 800 x 480 Video Out Connection BNC Power Input...