Download Print this page

Proactive Protekt 1ST Defense Manual

Dynamic hybrid pressure prevention mattress system

Advertisement

Quick Links

PROTEKT 1
PRESSURE PREVENTION MATTRESS SYSTEM
INTENDED USE
The Protekt 1
Defense pump and mattress are intended to reduce the incidence of pressure
ST
ulcers while optimizing patient comfort.
PRODUCT FUNCTIONS
Pump
The functions of the Protekt 1
Power Switch (1)
Turn ON/OFF the power (green), the pump will start/stop operation.
Pressure Adjust Knob (2)
Turn the soft/firm knob to set at a comfortable pressure level.
Normal Pressure Indicator (3)
A visible indicator (green) tells that the pressure has reached a preset or user-defined level.
Low Pressure Indicator (4)
A visible indicator (orange) warns the pressure is below a preset or user-defined level.
Static Control (5)
Press to set the air mattress in static mode.
1. Power Switch
2. Pressure Adjust Knob
3. Normal Pressure Indicator
4. Low Pressure Indicator
5. Static Control
6. Hanging Brackets
Mattress
The Protekt 1
Defense Mattress is composed of a combination of components which include:
st
Foam pressure redistribution insert.
Nylon water resistant top cover with pocket for foam insert.
Nylon/PVC air bladders.
Non-skid heavy duty vinyl bottom cover.
270 Washington Street, Mount Vernon, New York 10553
Tel: 845-205-6004 Fax: 845-205-6005
www.proactivemedical.com
855-BE-PROACTIVE (855-237-7622)
DEFENSE DYNAMIC HYBRID
ST
Model #: 82030
Defense pump are described below. Please refer to the figures:
ST
(2)
(4)
(1)
(3) (5)
1
(6)

Advertisement

loading

Summary of Contents for Proactive Protekt 1ST Defense

  • Page 1 270 Washington Street, Mount Vernon, New York 10553 Tel: 845-205-6004 Fax: 845-205-6005 www.proactivemedical.com 855-BE-PROACTIVE (855-237-7622) PROTEKT 1 DEFENSE DYNAMIC HYBRID PRESSURE PREVENTION MATTRESS SYSTEM Model #: 82030 INTENDED USE The Protekt 1 Defense pump and mattress are intended to reduce the incidence of pressure ulcers while optimizing patient comfort.
  • Page 2 OPERATING INSTRUCTIONS Place pump on horizontal surface or hang it by means of the hook. Open mattress on the bed. Secure it with end flaps or straps. Air tubes must be at foot end of bed. Connect air feed tubes to air outlet on the mattress and pump, ensuring that the tubes are not kinked or twisted.
  • Page 3 ENTRAPMENT GUIDELINES The use of Bed Rails is dependent on the setting as well as the facilities protocols. Proactive Medical does not make product recommendations for any given patient. Those decisions are the responsibility of the health care facility and/or health care professional(s) familiar with each patient’s unique requirements.
  • Page 4 LIMITED WARRANTY Your Proactive Medical branded product is warranted to be free of defects in materials and workmanship for 2 Years Non-Prorated from the date of purchase for the original consumer. This device was built to exacting standards and carefully inspected prior to shipment. This Non-...

This manual is also suitable for:

82030