Operation; Control Panel And Remote Control - LG W122CE Owner's Manual

OPERATION

Control Panel and Remote Control

7
4 3
NOTE
• The feature may be changed according to the type of model.
Power
1
Press to turn the air conditioner ON or
OFF.
Fan Speed
2
Press to set the Fan Speed (Nivel Vent.) to
Low (Bajo) (F1), Medium (Medio) (F2) or
High (Alto) (F3).
Delay ON/OFF Timer
3
Delay ON - When the air conditioner is off,
set it to automatically turn on from 1 to 24
hours later, at its previous mode and fan
settings.
Delay OFF - When the air conditioner is
on, set it to automatically turn off from 1 to
24 hours later.
NOTE
• Each press of the Timer (Control
Tiempo) button advances the timer by
1 hour. After the last press the display
returns to the temperature setting.
Operation Mode
4
Press the Mode (Modo) button to cycle
between 4 types of air conditioner
operation: Energy Saver (Ahorro Energía) /
Cool (Frío) / Fan (Vent.) / Dry (Deshum)
6
5
2 1
Remote Control
5
3
Energy Saver (Ahorro Energía) - In this mode
the compressor and fan turn off when the set
temperature is achieved. Approximately every
3 minutes the fan turns on to allow the unit
sensor to accurately determine if more cooling
is needed.
Cool (Frío) - This mode is ideal on hot days to
cool and dehumidify the room quickly. Use the
Temp buttons to set the desired room
temperature and use the Fan Speed (Nivel
Vent.) button to set the desired fan circulation
speed.
Fan (Vent.) - In this mode the fan circulates air
but the compressor does not run. Use the Fan
Speed (Nivel Vent.) button to set fan speed to
High, Medium or Low. In this mode, you cannot
adjust the set temperature.
Dry (Deshum) - This mode is ideal for rainy
and damp days to dehumidify the room
rather than cooling it significantly. Humidity is
removed from the room by the combination of
compressor operation and the fan speed fixed
at Low. The compressor and fan turn off once
the set temperature is reached. Fan speed
cannot be adjusted in Dry (Deshum) mode.
EN
1
2
4
17