Declaration Of Conformity; General Information; Storing The User Manual; Reading And Understanding The Manual - LANGER EMV-Technik EMC-Basic 1 set User Manual

Demonstration boards mini burst field generators
Table of Contents

Advertisement

1. Declaration of Conformity

Manufacturer:
Langer EMV-Technik GmbH
Nöthnitzer Hang 31
01728 Bannewitz
GERMANY
Langer EMV-Technik GmbH hereby affirms, that the product specified below
EMC Basic 1 set
Demonstration Boards Mini Burst Field Generators
Agrees with the regulations of EC guidelines:
- Low Voltage Directive 2014/35/EU
- EMC Directive 2014/30/EU
- Restriction of certain Hazardous Substances 2011/65/EU and EU 2015/863
Applied standards and technical specifications:
DIN EN 61010-1:2020-03 Safety requirements for electrical equipment for measurement, control,
and laboratory use - Part 1
DIN EN IEC 61000-6-1:2019-11 EMC - Immunity
-
DIN EN 61000-6-3:2011-09 EMC - Emission
Person authorized to compile the technical file:
Gunter Langer
Bannewitz, 2022-01-12
G. Langer, General Manager
4
Langer EMV-Technik GmbH

2. General Information

2.1 Storing the User Manual

This user manual provides the basis for the safe and efficient use of the EMC-Basic 1 set. It must be
kept handy and easily accessible for the user.
2.2 Reading and Understanding the User Manual
Read and understand the manual and observe the instructions carefully before using the
EMC- Basic 1 set. Please consult Langer EMV-Technik GmbH if you have any questions or
comments.
The user manual must be kept readily available in the immediate vicinity of the product.

2.3 Local Safety and Accident Prevention Regulations

The applicable local general safety and accident prevention regulations must be adhered to.

2.4 Images

Images in this manual facilitate a better understanding, but can deviate from the actual execution.

2.5 Limitations of Liability

The Langer EMV-Technik GmbH is not liable for personal injury or damage to material, if
the instructions in this user manual were not followed.
the product was used by personnel who are not qualified in the field of EMC and who are not fit to
work under the influence of disturbance voltages and electric and magnetic fields.
the EMC-Basic 1 set was not used as intended.
the EMC-Basic 1 set was arbitrarily modified or technically altered.
spare parts or accessories were used, that were not authorized by Langer EMV-Technik GmbH.

2.6 Errors and Omissions

The information in this user manual has been checked very carefully and found to be correct to the
best of our knowledge; however, Langer EMV-Technik GmbH can assume no responsibility for spel-
ling, typographical or proofreading errors.

2.7 Copyright

The content of this user manual is protected by copyright and may only be used in connection with
the EMC-Basic 1 set. This user manual may not be used for other purposes without the prior consent
of Langer EMV-Technik GmbH.
www.langer-emv.com
5

Advertisement

Table of Contents
loading

Table of Contents