Advertisement
by using a Windows based PC and it is required only during the rst mount setting
We strongly suggest to read carefully the StarGo User Manual and the Mount User Manual
Step 1
Power On the StarGo
1 & 2 - Connect the StarGO to the PC by using the provided USB cable
3 - Connect the provided power supply to the the home power outlet
4 - Check that the power supply output it is set on 15v
5 - Connect the power supply to the StarGo board
Step 2
Install the StarGo Software on the Pc
1 - Insert the provided USB Pendrive in the PC USB port
2 - Install the Installer_StarGO_XXX.exe
that comes with the provided pendrive
(The installer le it is located inside
the Installer-Tutorial-Software Folder)
Step 3
Launch the StarGo Software
1 - Double click on the StarGo.exe software icon
2 - Click on the gear button
3 - Select the connection mode (USB, Bluetooth or Wi-Fi)
NOTE: to establish a wireless connection the device
must be rst paired with the StarGo board. See StarGo
User Manual from page 47 to page 52
4 - The mount comes already con gured from
the factory (check in the ADVANCED panel)
5 - Check that the "Motors Alway ON" option is correctly
enabled in the RA DEC panel
Step 4
Set your Observatory Location
Click on the ALIGN panel and set your
OBSERVATORY LOCATION coordinates.
NOTE: in order to have the correct mount
behaviour, any other software (planetary,
sequencer etc.) must have the same coordinates
system
EVO-ZERO
QUICK START GUIDE
The following fundamental 4 steps, must be set at least one time
5
4
1
2
1
4
1
2
3
2
3
5
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Avalon Instruments EVO-ZERO
Summary of Contents for Avalon Instruments EVO-ZERO
- Page 1 EVO-ZERO QUICK START GUIDE The following fundamental 4 steps, must be set at least one time by using a Windows based PC and it is required only during the rst mount setting We strongly suggest to read carefully the StarGo User Manual and the Mount User Manual...
- Page 2 Since the mount alignment procedure (Sync Home Position) is not available on SkySafary and on other planetary app, Avalon Instruments developed a solution to solve this missing important function. Simply perform the following steps. 8b - Choose a star close to the Southern Meridian and to the Horizon, then perform a Sync on it, without move the mount from his Celestial Pole pointing.
Need help?
Do you have a question about the EVO-ZERO and is the answer not in the manual?
Questions and answers