Trigonometry - Texas Instruments MathPrint TI-30X Plus Quick Manual

6

Trigonometry

Press w to choose an angle mode from the mode screen. Note that DEG is the default.
Press t > > to display the DMS menu.
Example
Use the TI-30X Plus MathPrint™ in radian mode to convert
Keystrokes and solution:
Press w > n to be in radian mode.
Enter and press t > > 1 n.
Example
Use the TI-30X Plus MathPrint™ to convert
minutes and seconds. (Here angle mode is set to DEG.)
Keystrokes and solution:
62.4 and press t > > 6 n.
Enter
Note: The default calculation mode is
decimal degrees.
to an angle expressed in degrees,
17
to radians.