Setup 2
2
The default settings are marked with
File Number
Selects the method used to assign file numbers to images.
Series
Reset
USB Connect
Selects the USB mode to be used when connecting the camera to a computer or a PictBridge
compliant printer using the USB cable.
PictBridge
PTP
Normal
Video Out
Sets the video signal output according to connected equipment.
NTSC
PAL
For details on the operation
.
Assigns numbers to files in sequence even if the recording
folder or the "Memory Stick" is changed. (When the replaced
"Memory Stick" contains a file with a number higher than the
last assigned number, a number one higher than the largest
number is assigned.)
Starts from 0001 each time the folder is changed. (When the
recording folder contains a file, a number one higher than the
largest number is assigned.)
Connects the camera to a PictBridge compliant printer (page
69).
When [PTP] (Picture Transfer Protocol) is set and the camera
is connected to a computer, the images in the recording folder
selected by the camera are copied to the computer.
(Compatible with Windows XP and Mac OS X.)
Connects the camera to a computer (page 58).
Sets the video output signal to NTSC mode (e.g., for the
USA, Japan).
Sets the video output signal to PAL mode (e.g., for Europe).
page 44
t
53