Advertisement
5) Treating Power Entry
▪ Keep the tightness of power entry⑧ by using water-proof
connector(flexible connector #16 is supplied as a standard
specification) or cable grand.
▪ Product can be damaged by water or dust if the cable entry is
exposed outdoor without airtightening.
6) Body Cover Assembling
Assemble the body cover in reverse order of separating.
■ Wiring for LC(External Contact) Type – Custome Made
▪ In case of LC type which selets sound tone by external
contact, power line and signal line come out. Connect each
line as below.
▪ Power Line : UL1015-NO.16(1.25sq) x 2C 400mm
▪ Signal Line : UL1007-NO.22(0.3sq) 400mm
▪ In case of product using AC voltage, do not allow power
supply either to common line or to signal line..
▪ This product is water-proof and anti-corrosion type for
outdoor use. But, install with vertical direction at a place or
machine where exists no big vibration and no strong impact as
long as possible.
▪ Refer to below information and drill necessary mounting holes on
profitable part of the product.
(Make sure PCD from external view drawing.)
▪ Fix the product by using mounting bolt(M8-4EA).
▪ This product is explosion-proof, water-proof and anti-corrosion
type. When separate and assemble the product for wiring, repair
or check, keep the airtightnees of the product by tightening each
bolt and nut.
ООО "РусАвтоматизация"
▪ If using voltage is seriously higher or lower than rated voltage, it
can reduce the self-life of the product or can cause a problem
on product operating. Make sure the using voltage does not
exceed +/- 5% of the rated voltage.
▪ If lens or body of the product is contaminated by chemicals such
as thinner, benzene, the product can be damaged, discolored
or deformed. Please be careful.
▪ Keep airtightness of cable entry by using water-proof cable
grand or water-proof connector. Product can be damaged by
water or dust if the cable entry is exposed outdoor without
airtightening
▪ Do not give strong impact to the product. It can be a reason of
part(s) damage or short circuit.
▪ Do not strongly pull the wire out from the product. It can cause a
disorder.
Lens Deformation Caused
454010
Россия,
Челябинск, Гагарина 5,
тел./факс +7(351)211 64 57
,
info@rusautomation.ru, www.rusautomation.ru,
Situation
Main Cause
Wire Disconnection
Non Lighting
with Bulb
Supplying Voltage Lower
Than Rated Voltage
Feeble Lighting
Wrong Selecting Voltage
Low Revolving Speed
Selection Switch to 220V
Sound Tone Deter orat on
(In Case of AC Type)
Wrong Operating Revolving
Speed Control Volume
Supplying Voltage Higher
Short Self-Life of Bulb
than Rated Voltage
The Voltage of Bulb
by Bulb Overheating
is Higher than Rated
Damage on Transformer
Voltage
(AC Type)
Non Revolving
Problem with Motor
Supplying Voltage Higher
Higher dB than Standard
than Rated Voltage
Short Circuit of Sound Tone
Signal Line
Double Sound Tone
Problem with Sound Tone
Selection Switch
Wrong Wiring
No Power Supply
No Sound
Problem with Horn
Q-LIGHT CO., LTD.
http://www.qlightkr.com
E-mail : qlightkr@qlightkr.com
Seoul Office (Domestic Sales & A/S)
Tel) 02-2679-6152
Ansung BD A-312, 410-13 Sindorim-Dong, Guro-Gu, Seoul
Overseas Marketing Team / Plant
Tel) 055-328-4082
Fax) 055-328-4083
Plant #1 : 178-1 Woogye-Ri, Sangdong-Myun, Kimhae-Si,
KyungNam, Korea
Plant #2 : 417-1 Geumsa-Dong, Geumjung-Gu, Busan
тел. 8 800 775 09 57
Solution
Wire Re-connection or
Bulb Change
Making Sure Using
Voltage
Selecting Voltage
Selection Switch to
110V
Turn the Volume
Clockwise
Making Sure Using
Voltage
Changing Bulb with
Rated Voltage
Contact Q.Light or
Their Agent
Making Sure Using
Voltage
Making Sure Wiring
Contact Q.Light or
Their Agent
Making Sure Wiring
Making Sure Wiring
Contact Q.Light or
Their Agent
, +7(351)799 54 26,
(звонок бесплатный)
русавтоматизация.рф
Advertisement
