Advertisement
FAQS
GENERAL PROBLEMS WITH TV SET
No Power.
No Picture.
No sound or
distorted sound
No operation can be
performed with the
remote control
Make sure power plug is inserted correctly into power outlet.
Blake sure the following is connected correctly
• Adjust the antenna
• Move TV away from any products that may cause interference.
• Autotune the unit again
• Go to another channel
• Make sure everything is connected correctly
• Check if input settings for TV is correct
• Audio settings are properly set
• h4ake sure volume is not muted.
• If earphones are connected, unplug them.
• Adjust the volume
• Check the batteries are inserted correctly
• Replace batteries if they have been used for awhile
• Make sure to point remote control at the TV sensor and try apain
• Blake sure you are not further then 6m away from TV.
• Remote any obstacles that may be in the way of direct line
of sipht from remote control to the TV sensor.
22
Advertisement
