Advertisement
MENUS
Connect the Lan port (RJ45) of the tv and the router using a Lan cable. The router should be
1.
connected to the Internet beforehand.
If the router supports DHCP, the lv is automatically connected to the network when you connect the
tv to the network with a Lan cable.
If the network is not automatically connected
Press the
button on the remote control.
2.
Select
— connection —• network connection settings —+ wired connection(Ethernet).
3.
To see the details, click the settings —+connection — network — connection settings in user guide.
SETTING A WIRELESS NETWORK
1.Turn on the power of the router connected to the internet.
2.Press the
button on the remote control.
Select
—+connection —+network connection settings —+ wi-fi connection.
3.
When the network search is complete, the list of networks available for connection is shown.
4.
S.Select a network to connect.
6.If your wireless Lan router is password protected, enter the password configured for the router.
To see the details, click the settings — connection — network connection settings in user guide.
NETWORK SETTING WARNINGS
Use standard Lan cable (connect to cat7 or higher with RJ45 connector, 1 0 base-T, or 1 00 base
Tx Lan port)
Resetting the modem may fix some network connection problems. Turn the power OFF,
disconnect and reconnect it, and then turn the power on to solve the problem.
- The manufacturer is not responsible for any network connection problems or any faults,
malfunctions, or errors caused by network connection.
The network connection may not work properly because of network settings or the Internet Service
Provider.
DSL service must use a DSL modem; and cable service must use a cable modem. Since only a
limited number of network connections may be available, TV network setting may not be used
depending on the contract with Internet Service Provider. (If the contract does not allow more than
one device per line, only the already-connected PC may be used.)
A wireless network can experience interference from other devices that use the 2.4 GHz frequency
(wireless phone, Bluetooth device, or microwave oven). Although interference can also happen
when using the 5 GHz frequency, it is less likely to occur.
10
Advertisement
