Remote Control (Compact) - QRS PNO3 User Manual

QRS PNOmation 10 Button IR Control
The QRS 10 Button Remote is an IR remote control. The IR receiver on the PNOmation system is the clear button on the front of the PLx or Plx. Although it
works with past controllers and past controllers remotes work with the new PNOmation system, this remote has functions that are only applicable to the latest
PNOmation3 system and are not available directly via IR on older remotes.
Master Volume Up & Down - is the same as on all past remotes. When volume curves are set up correctly, the master volume up and down should track
the audio background/piano and piano solos without additional adjustments. (http://bit.ly/QRSPNO3setup)
Play/Pause - is exactly what it says, it starts playback or pauses playback then starts it up again.
Next Track - Brings up the next track in the play list that is currently next up.
Wi-Fi Network Mode (light 3 is amber) - The PNOmation3 WB unit operates in both Stand Alone and network mode simultaneously. Older PNOmation's
are either or. Pushing the button puts the piano in network mode refreshes the IP address, where a homes network router assigns an IP address to the piano.
Putting the IP address into your devices web browsers URL address bar, will open the PNOmation Interface. On older systems where the PNOmation system
uses an external Netgear network access point/extender the extender needs to be setup to talk to your router first. (http://bit.ly/QRSNetgearNet).
Wi-Fi Stand Alone Mode (light 3 is green) -Stand Alone mode is necessary if using the PNOtouch user interface or your external Wi-Fi interface is set
to be an Access Point. If you have an external Netgear Wi-Fi extender you first log into the QRSPNO Wi-Fi network then enter 192.168.1.1 in your devices URL
address bar. If you have a PNOmation
Voice Prompt On-Info-Off - This outputs the status of your PNOmation system. Selecting this button will turn Voice Prompts on, output the Serial Number,
Network Modes, Software OS version, and the IP Addresses of your PNOmation system, then turn Voice prompts off again.
Check for OS Updates - Will reach out to your PNOmation's cloud account and check for any Operating System updates that are available. Once it is down-
loaded a Voice Prompt will state its being updated. NOTE: Sometimes this can be several minutes if the download is large. If you do not hear any follow-up
there probably was none and or your piano is not connected to the Internet. For more detail you will need to log into the OS.
Reboot - Will reboot the PNOmation system.
Play List 9 is used for coin operation playback. But can also be used to store your favorite songs and que them up quickly. Push play after selecting
QRS Music Technologies, Inc.
QRS Pno
Master Volume Down
Play Pause
Wi-Fi - Network Mode
Voice Prompt On-Info-Off
Reboot
WB you just need to enter 10.3.2.1 (password is qrsmusic)
3
User Guide
3
PNOmation
 
Master Volume Up


Next Track

Net SA

 Wi-Fi - Standalone Mode
 
Check For OS Updates
Que Up Play List 9
 
(also the coin op list)
Technical Support - 800-247-6557
www.qrsmusic.com