Care And Maintenance - Whistler TITAN User Manual

PROBLEM: Unit does not respond to K band Speed sign.
• Some K band speed signs are FMCW and will be rejected
by the DSP, this is normal as police radar is CW.
PROBLEM: Audio alerts are not loud enough.
• Check audio level setting.
• Check AQ, AQ SPD, AQ VOL or SPDVOL setting in Option
Mode.
PROBLEM: GPS features not working.
• Check to make sure GPS is set to ON or Stealth.
PROBLEM: Laser Falsing
• Move away from electrical items having motors or monitors.
If difficulties occur which cannot be solved by information in
this Troubleshooting section, please call before returning your
unit for service.
or visit our Help Center & FAQ page at

Care and Maintenance

During the summer months, avoid prolonged exposure to
direct sunlight by removing your unit from the dash when your
vehicle is parked for an extended period of time. Do not spray
water, cleaners, or polishes directly onto the unit. Do not use
any abrasive cleaners on the unit's exterior. To allow air to pass
below the unit, do not place directly on dashboard.
TROUBLESHOOTING
Whistler Customer Service
1-800-531-0004
www.whistlergroup.com
34