About Replace The Microprocessor With A New One - Marantz SR4023 Service Manual

Hide thumbs Also See for SR4023:
Table of Contents

Advertisement

12. ABOUT REPLACE THE MICROPROCESSOR WITH A NEW ONE

When replaced of the µ-PRO (Microprocessor) or the Flash ROM, confirm contents of the following.
PWB
Pos.
Description
Name
No.
MAIN
IC41 T5CB5(F ADD Z) MAIN CPU SR5023
After replaced
A : Mask ROM (With software). No need write-in of software to the microprocessor.
B : Flash ROM (With software). Usually, no need write-in of software. But, when the software was updated, you should be
write-in of the new software to the microprocessor or flash ROM. Please check the software version.
C : Empty Flash ROM (Without software). You should be write-in of the software to the microprocessor or flash ROM.
Refer to "Update procedure" or "writing procedure", when you should be write-in the software.
マイコン等を交換した場合の対応について
マイコン
および
µ-PRO(
)
Flash ROM
PWB
Pos.
Name
No.
MAIN
IC41 T5CB5(F ADD Z) MAIN CPU SR5023
交換時の対応
ソフトウェア書き込み済み
A : Mask ROM (
ソフトウェア書き込み済み
B : Flash ROM (
す。バージョンの確認をしてください。
交換時必ずソフトウェアの書き込みが必要になります。
C :
ROM (Flash ROM)
等を交換した場合の対応方法を下記の記載します。
Description
 交換時にソフトウェアの書き込みは必要ありません。
)
 バージョンアップにより交換時にソフトウェアの書き換えが必要な場合がありま
)
62
After
Remark
replaced
B
交換時の
備考
対応
B
、書き込み方法を参照してください。
Update

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sr4023n1bSr4023u1b

Table of Contents