Honda CIVIC 2014 Manual page 391

Air Valve
a
Air Compressor Hose
b
Plug
a
Accessory Power Socket
b
7
Air Valve
a
Switch
b
OFF
c
ON
d
389
1. Take the air compressor out of the luggage area.
2. Place the kit, face up, on flat ground near the tyre
to be inflated, away from traffic. Do not place the
kit on its side.
3. Remove the valve cap.
4. Attach the air compressor hose onto the tyre valve
stem. Screw it until it is tight.
u Make sure the air valve is closed.
5. Plug in the compressor to the accessory power
socket.
u Be careful not to pinch the cord in a door or
window.
2 Accessory Power Sockets P. 168
6. Turn on the vehicle's power system.
2 Carbon Monoxide Gas P. 64
2 Turning on the Power P. 218
7. Turn the air compressor switch on to inflate the
tyre.
u The compressor starts to inject air into the tyre.
u If you have started the power system, leave it
running while injecting air.
8. Inflate the tyre to the specified air pressure.
9. Turn off the kit.
u Check the pressure gauge on the air compressor.
u If overinflated, turn the air valve to deflate.
10. Turn off the vehicle's power system off, then
unplug the air compressor from the accessory
power socket.
11. Unscrew the air compressor hose from the tyre
valve stem. Reinstall the valve cap.
12. Store the air compressor in the luggage area.