Honda CIVIC 2014 Manual page 387

Air Valve
a
Air Compressor Hose
b
Valve
c
Plug
a
Accessory Power Socket
b
7
Air Valve
a
Switch
b
OFF
c
ON
d
385
7. Screw the air compressor hose onto the tyre valve.
Make sure the air valve is closed and the air
u
compressor is turned off.
8. Plug in the compressor to the accessory power
socket.
2 Accessory Power Sockets P. 168
9. Turn on the vehicle's power system.
2 Carbon Monoxide Gas P. 64
10. Turn on the air compressor and inflate the tyre to
the specified air pressure.
u The compressor starts injecting sealant and air
into the tyre.
u Refer to the driver's doorjamb label for the
specified pressure.
11. After the air pressure reaches to specified pressure,
turn off the compressor.
u Check the air pressure gauge on the air
compressor.
u If overinflated, release the air by turning the air
valve. Be careful not to spill any sealant.
12. Unplug the plug from the accessory power socket.
13. Unscrew the air compressor hose from the tyre
valve. Install the hose cap.
u Be careful not to spill any sealant when the hose
is disconnected. Wipe away any spills.