Sony XAV-622 Specifications page 3

General
Color
Inputs and Outputs
12V Trigger Output(s)
Antenna Terminal(s)
Audio/Video Input(s)
Audio In
Digital Audio Input(s)
Infrared Port
RCA Audio Output(s)
Remote Jack
USB Port(s)
Power
Current Drain
Input Voltage
Output Power
Tuner
FM Usable Sensitivity
Frequency Response
S/N Ratio
Selectivity
Stereo Separation
Video
Panel Type
Picture Modes
Resolution
Video Features
Color System
Weights and Measurements
Dimensions (Approx.)
Black
Power antenna
Amplifier turn on
AM/FM Antenna Input Terminal
1 AUX audio/video input
Rear camera with reverse input trigger
Front Aux in with variable level
Front USB input
Sony Bus terminal
-Ability to use all forms of USB devices may vary as not all devices are compatible.
-This unit can be connected to the following iPods. Update your iPod to the latest software before you use it.
-iPod Nano 1st generation*
-iPod Nano 2nd generation (aluminum)
-iPod Nano 3rd generation (video)
-iPod 5th generation (video)*
-iPod Classic
-iPod Touch
-iPhone
-This unit is compliant with MSC (Mass Storage Class) and MTP (Media Transfer Protocol) type USB devices compliant
with the USB standard.
-This unit cannot recognize USB devices via a USB hub.
-If you have any questions or problems concerning your unit that are not covered in the owners manual, consult your
nearest Sony dealer.
Wireless remote
Front and Rear/Sub selectable RCA pre-amp outputs
Optional wired remote terminal
Front USB - Full Speed
5 - 7 amps
12 V DC car battery (negative ground)
52W x4 Watts Max Power - CEA2006 Standard Power Output: 17 Watts RMS per channel into 4 Ohms, 4 channels driven
from 20 Hz to 20 kHz with less than 1% THD+N.
10 dBf
FM: 20-15,000 Hz
70 dB (mono)
75 dB at 400 kHz
40 dB at 1 KHz
6.1" TFT Active Matrix LCD Color Monitor
Normal, Wide, Full and Zoom
800 x 480
NTSC / PAL / SECAM / PAL-M
7.125 x 4 x 6.75" (w/h/d)
178 x 100 x 170 mm (w/h/d)