iPod® Video Cable
Supports on screen audio/video playback from iPod® products, including album artwork.
Connect, charge and control playback
The RC-200IPV provides video content as well as device control and charging.
3 Ft cable length allows convenient connectivity and placement of device.
Inputs and Outputs
Digital Audio Input(s)
1. Ability to use all generations of iPod® products may vary as not all products are
© 2010 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without
written permission is prohibited. Sony, Quick-BrowZer, Walkman, Xplōd, ZAPPIN, and the
This unit can be connected to the following iPod® products. Update your iPod to the
latest software before you use it.
-iPod Nano 1st generation*
-iPod Nano 2nd generation (aluminum)
-iPod Nano 3rd generation (video)
-iPod 5th generation (video)*
* When you connect iPod Nano1st generation or iPod 5th generation, Passenger
Control™ is not available.
If you have any questions or problems concerning your unit that are not covered in this
manual, consult your nearest Sony dealer.
Parts for installation and connection (1 set)
Sony and Xplōd logos are trademarks of Sony. iPod is a trademark of Apple Inc. All other
trademarks are trademarks of their respective owners. Features and specifications are
subject to change without notice. Non-metric weights and measures are approximate and
may vary. /Updated: April 6, 2012