Page 2
Roller Hawse & Cable Stop are included with Winch Model Number 25-4210 Parts List ITEM NO. QTY. PART NO. DESCRIPTION 1 CYC5908 Winch Mount 6 PUR1155 5/16" x 1" Bolt 10 PUR1275 Locknut 5/16" Nylock Clear Zinc 2 PUR1421 U-Bolt 5/16" x 1-1/8" x 1-1/2"...
Page 3
THIS WINCH MOUNTING KIT CAN BE USED TO MOUNT EITHER A CYCLE COUNTRY 1500/2500 WINCH OR A WARN 1.5/15RT-XT/25RT- XT/30RT-XT WINCH TO YOUR ATV. All directions referring to right and left are when the rider is sitting on the machine. Please Note: The roller hawse, cable clamp, cable stop, and hardware are included with the winch.
Page 4
CYCLE COUNTRY 2500 WINCH MOUNTING INSTRUCTIONS Using the four bolts PROVIDED WITH THE CYCLE COUNTRY WINCH, mount the winch to the winch mount plate. Be sure that when the winch is mounted to the ATV, the winch motor is to the RIGHT side of the machine.
Page 5
FAILURE TO RELEASE THE SWITCH MAY CAUSE DAMAGE T WINCH PARTS OR TO THE ATV. When using the Winch to raise and lower a Cycle Country Plow, a Cable Stop must be installed. Hook the Winch Cable to the CYC0345 (U608) (item #4 on your 15-0001 push tube kit) through the slotted hole.
Page 6
ONE YEAR LIMITED WARRANTY For the period of one year from the purchase date Cycle Country Accessories Corporation will replace for the original purchaser, free of charge, any part or parts, when found, upon examination by Cycle Country Accessories Corporation, to be defective in material, workmanship, or both.
Page 7
If a winch is what you must have, then you’ve come to the right place: 1500lb and 2500lb Winches We also have an extensive line of winch mounts for both Cycle Country and Warn winches If you need to haul more gear on your quad, check out our baskets:...
Need help?
Do you have a question about the 25-4210 and is the answer not in the manual?
Questions and answers