Troubleshooting - Overmax Camspot 4.7 Pro User Manual

Mounting
•
To mount the camera on the ceiling, screw on the camera
bracket and adjust with the Allen wrench included in the set.
Make sure the surface is clean. Move the camera lens to the
desired position (fig. 7).
•
To mount the camera on a wall, screw on the camera bracket
and adjust with the Allen wrench provided (fig. 8).
•
The Allen wrench is used to adjust the camera level.
Google Assistant/Alexa function
•
If you wish to use this function, you will need to download
the Tuya Smart app.
•
The Tuya Smart app is free and available for Android (Google
Play) and iOS (App Store) devices.
Record saving
Videos recorded on the memory card must at first be saved in the
mobile device memory through OverMax Control application. Data
on the card are encoded so if you fail to save them in the device
memory, you will not be able to read them afterwards.

Troubleshooting

QUESTION
How do I restore the
factory settings on my
device?
After selecting the
2.4GHz Wi-Fi network
and entering the correct
password, the camera
still cannot connect.
ANSWER
Remove the camera from the device list in
the app or press and hold the reset button
for 8 seconds until you hear the sound.
Make sure your phone and camera are
connected to the same network.
Make sure that the DHCP protocol is
enabled.
Press and hold the reset button for
5 seconds to reset the device.
Make sure the Wi-Fi signal strength is
high.
EN