Related Manuals for MicroIQ UT
Summary of Contents for MicroIQ UT
- Page 1 MODELS: UT CT ST Locker mode instructions For Office furniture, storage cabinets, lockers, safes, vaults, secured enclosures...
- Page 2 To move the lock mechanism 90 or 180 degrees clockwise or counterclockwise from the locked and unlocked states. Multiple levels of access: 1.Master code and/or blue control key fob 2.User code and/or black key fob MicroIQ Note: The is pre-programmed with a factory master code The factory master code is: 135243. Operation: Unlock with a code by entering a valid code.
- Page 3 Result: User code 1234 was used to unlock the lock. Note: The user code created in locker mode is a one time code, and is erased when the MicroIQ is unlocked. UNLOCK USING THE MASTER CODE ☼...
- Page 4 Note: If the knob is left in the unlocked position for more than 20 seconds, the user code will be erased. However, if the MicroIQ is left unlocked for less than 20 seconds, the user code will not be erased and the device can still be unlocked with that code.
Need help?
Do you have a question about the UT and is the answer not in the manual?
Questions and answers