Logitech ZONE WIRED EARBUDS Setup Manual page 4

WHAT'S IN THE BOX
1 . Wired earbuds with M size eargels and
3 .5mm connector
2 . In-line controller with USB-C connector
3 . USB-A adapter
4 . Travel bag
5 . Replaceable eargels (1 pair per XS/S/L size)
6 . User documentation
CONNECTING THE EARBUD
Connect via 3.5mm
1 . Unplug 3 .5mm connector from the in-line
controller .
2 . Plug the 3 .5mm connector into your mobile
or tablet 3 .5mm port .
Note: Compatibility may depend on device models .
Mic and audio quality will convert to analog
with 3 .5mm connector .
Connect via USB-C
1 . Plug the 3 .5mm connector into the controller .*
2 . Then plug the USB-C connector into your
computer USB-C port .
Note: Compatibility may depend on device models .
Connect via USB-A
1 . Plug the 3 .5mm connector to the controller .*
2 . Plug the USB-C connector into the
USB-A adapter .
3 . Plug the USB-A connector into your computer
USB-A port .
Note: Only use the USB-A adapter with the
provided earbuds .
* Make sure 3 .5mm connector is fully inserted
into the controller .
3.5mm USB-C USB-A
USB-C
XS
S
L
USB-A
4 English