Roco and Fleischmann Z21 multi MAUS Quick Manual

2. CREATING FURTHER LOCOMOTIVES
To create a new loco with the name "BR024" and address 24, proceed as follows in three simple steps:
1. Create the loco with a new name in the multiMAUS loco library.
2. Assign a new, not yet assigned decoder address in the multiMAUS.
3. Set the decoder of the loco to the new decoder address with the multiMAUS.
2.1 Creating a new locomotive in the multiMAUS
• Switch to the library mode.
• Scroll with the arrow keys until "NEW" appears in the display
• Confi rm your selection with the key
• Enter the name with the numeric keypad. On the keys of the multiMAUS there are – like on an old cell phone – all letters from
A to Z. Each numeric key is assigned several letters. If you press once, the fi rst letter appears, if you press twice, the second letter
appears, if you press three times, the third letter appears. When you press the fourth time, the digit appears:
– Press 2 times the key 2 for the letter "B" or, e.g., press 4 times the key
abc
– After entering the text, confirm with
• Next, enter the new address that the loco is to receive.
– First press 2 , then 4
abc ghi
– Confirm your selection with the key
• Now select the possible speed levels that the decoder understands. For current decoders use 128.
– Use the arrow keys to select "128" between the values.
– Confirm your selection with the key
2.2 Changing the decoder address with the multiMAUS
The decoder address is stored as the fi rst confi guration variable, CV1 for short, in the digital decoder of each loco. With the help of the
multiMAUS you can easily change this CV setting. Attention: For this programming only one loco may be on the track.
1
• Press the key combination + to access CV1
MENU
2
• Enter the desired loco address by pressing fi rst
• Confi rm your selection with the key
Now your loco has the decoder address 24 and reacts to all commands you give it with the multiMAUS.
If you have any technical questions / problems, you can contact the service hotline.
Our experts will be happy to help you with tips and tricks:
▪ https://www.fl eischmann.de/de/service/hotline/index.html
▪ https://www.roco.cc/de/service/hotline/index.html
Modelleisenbahn GmbH | Plainbachstrasse 4 | 5101 Bergheim, Austria | www.roco.cc | www.fl eischmann.de
Have a GREAT TIME with your digital system!
A5_MultiMaus_Kurzanleitung_02.02.2022_ENG.indd 1-2 A5_MultiMaus_Kurzanleitung_02.02.2022_ENG.indd 1-2
>
2 for the digit "2".
abc
>
4
and then
abc ghi
Service Hotline
▪ GRATIS: 00800 57626000 (Germany, Austria, Switzerland)
▪ INTERNATIONAL: +43 820 200668 INTERNATIONAL: +43 820 200668
Model Railway Control
Alter/Age +
14
multi MAUS
Quick Guide
Z21 is an innovation from & .
20.06.22 13:50 20.06.22 13:50