L&S OSAKA WW Manual

12 - 24 V
Warm White (WW)
Natural White (NW)
Emotion Dual Color
(EDC)
INSTALLAZIONE / INSTALLATION / INSTALLATION / INSTALACIÓN / INSTALLATION
ø 8mm
029-FIS20_ 81771230100
TOUCH SENSOR
IR SENSOR
L=mm
1
2
OSAKA
KIT DI FISSAGGIO / FIXING
KIT / BEFESTIGUNGSKIT /
KIT DE FIJACIÓN / KIT DE
FIXATION
2,4mm 14mm
17,7mm
3 5
!
Per versione EDC senza sensori
For EDC version without sensors
Für EDC-Version ohne Sensoren
Pour la version EDC sans capteurs
4
Para la versión EDC sin sensores
Emotion Jumper
3000K 4000K
(INCLUSO CON VERSIONE EDC
INCLUDED WITH EDC VERSION
IN DER EDC-VERSION INBEGRIFFEN
INCLUS AVEC LA VERSION EDC
INCLUIDO EN LA VERSIÓN EDC)
6
!
>10mm
2,2x16
IRS SENSOR
ON/OFF version ON/OFF
(WW - NW - EDC) (WW - NW )
MAX 6cm
DIMMER
EMOTION DUAL COLOR version (WW - NW )
(EDC)
3 SEC.
SWITCH-ON
THE LAMP
Warm White Natural White
3000K 4000K
ATTENZIONE: Alla prima accensione l'IR esegue un
set-up di 3 sec c.ca.
DIMMERAZIONE: Tenere premuto il LED per regolare
ATTENTION: Before the first use, the IR will go through a
l'intensità luminosa della lampada.quando viene raggiunta
set-up that will last around 3 seconds.
la massima intensità luminosa il LED lampeggerà per una
ACHTUNG: Beim ersten Einschalten des Lichts führt der
volta.
IR ein set-up von 3 Sekunden durch.
DIMMABLE: make adjustments of the light intensity by
ATTENTION: Au premier allumage l'IR effectue un set up
keeping the touch led pressed.When maximum brightness
d'environ 3 secondes.
of the load is reached, the led of the touch blink twice.
CUIDADO: Al encender por primera vez, el IR realiza un
set-up de 3 segundos.

Auto Standby (18H)

TOUCH SENSOR
Auto Standby (18H)
www.ls-light.com