Yamaha R3 2021 Owner's Manual page 22

Instrument and control functions
3.0 L (0.79 US gal, 0.66 Imp.gal) of fuel
remains, the last segment starts flash-
ing. Refuel as soon as possible.
TIP
If a problem is detected in the electrical
circuit, the fuel level segments will flash
repeatedly. If this occurs, have a
4
Yamaha dealer check the vehicle.
Clock
1
1. Clock
The clock uses a 12-hour time system.
To set the clock
1. Push both the "SELECT" button
and "RESET" button until the hour
digits start flashing.
2. Use the "RESET" button to set the
hours.
3. Push the "SELECT" button and
the minute digits start flashing.
4. Use the "RESET" button to set the
minutes.
5. Push the "SELECT" button to con-
firm the settings.
Coolant temperature meter
EAU87290
MPH
MPG mile
1
1. Coolant temperature meter
This meter shows the temperature of
the coolant, and thereby the condition
of the engine. The segments come on
from "C" (cold) to "H" (hot) as the en-
gine temperature increases. If the hot
segment flashes, stop the engine as
soon as possible, and let the engine
cool. (See page 7-40.)
Transmission gear display
EAU87350
MPH
1. Neutral indicator light "
2. Transmission gear display
MPG mile
This display shows the selected gear.
The neutral position is indicated
by "
light.
4-5
1 2
MPG mile
"
" and by the neutral indicator
EAU87400
MPH