IP autoscript WinPlus- Installation & Operation Manual page 25

A blue progress bar will indicate how much of the process has been completed:
If you select to cancel, the update the process will show as aborted:
Once the firmware download to the device has completed, the install will automatically begin.
A blue arrow moving down shows the image is installing. A blue progress bar will indicate how much
of the process has been completed:
When the image installation is done, the Firmware Update will show as "Complete":
The warning sign will no longer be visible in the Status column of the Devices window.
Please Note: Multiple devices can be updated simultaneously in parallel. It is not necessary to update
devices one at a time.
When updating firmware, the monitor will display the message "Image Uploading" while the
firmware is being downloaded to the unit. The monitor will display the message "Writing Image"
when installing the new firmware.
Page | 24