Care And Maintenance - Zizito ZOE HD-168 Manual

EN
1. Do not leave children unattended while
using the product.
2. The child should be instructed how to use
the tricycle properly under the supervision
of the adult.
3. The product apply to children age 18-60
months.
4. The maximum safe working load is 20 kg
(44Ibs).
5. There are small spare parts inclusive in
this products, and all assembling must be
done by adults.
6. Safety belt must be fastened well before
the child ride on. Shoes, protective-gear
and helmet should be worn when using.
Do not use in the dangerous areas such as
rough roads, public streets, slopes, pools
and seaside surrounding to avoid acci-
dent & drowning.
8. Before use, safety inspection for the
product include the hardware, joint parts,
locking device or sharp edges by adult
1. Please check all components (screws
and rivets) to ensure they are firm and
intack without damaged before use. For
the safety of your child, do not use if any
irregular.
2. Avoid long-duration exposure to humid,
cold, sunlight or extreme temperature
environment, it will cause parts rust,
aging, color change or fade, and other
conditions, which will affect the service life
of the product or causing risks.
3. Don't bleach or use the chemicals to
clean the product. Use clean water to
22
WARNINGS

CARE AND MAINTENANCE

is required. Never use if any parts are
missing or broken. It is compulsory to
ensure that all locking devices are en-
gaged before use or after switch mode or
configuration.
9. Overloading or incorrect use, as well as
to use the wrong components may cause
the product can't work or unsafety.
10. Do not use if product is unstable or dam-
aged.
11. Before use, please peruse the instruction
manual & follow up all the steps to ensure
the safety of your child. Keep these in-
struction manual for future reference. Your
child's safety would be affected if don't
follow the instructions.
12. Do not hang any article on the tricycle, it
will affect the stability and safety.
13. Do not let the product close to the fire.
14. Recommended torque of the fasteners of
the product is greater than 8kgf cm, and
less than 16 kgf cm.
wipe the dirt. Avoid water on the metal
parts so as not to rust and affect the
service life of the product.
4. Verify regularly the status of product such
as the wheels, locking device, moving
parts.
Repair it in time if there is any problem.
5. Can use a little diluted lubricant on each
rotating part such as wheel joints, etc.
Don't use sticky lubricant to avoid debris
sticking and affecting rotation.