Sony SLV-D950G Operating Instructions Manual page 55

B Use this hookup if your A/V receiver has a Dolby Digital, MPEG audio
or DTS* decoder, a digital input jack and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio or DTS
decoder function of your AV amplifier (receiver). You are not able to enjoy the
surround sound effects of this player. You must make connections using
.
B-2
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
DVD-VCR
B-1
(red)
R
AUDIO
L
(white)
VIDEO
to OUT AUDIO L/R
l: Signal flow
to audio input
[Speakers]
Rear (L) Subwoofer
Rear (R)
Note
• After you have completed the connection, be sure to set "Dolby Digital" to "Dolby Digital"
and "DTS" to "On" in "AUDIO SETUP" menu (page 57). If your AV amplifier (receiver) has
an MPEG audio decoder function, set "MPEG" to "MPEG" in "AUDIO SETUP" menu
(page 57). Otherwise, no sound or a loud noise will come from the speakers.
Stereo audio cord
(supplied)
and
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(white) (red)
AV amplifier (receiver) having
a decoder
B-2
DIGITAL AUDIO OUT
COAXIAL
OPTICAL
to DIGITAL AUDIO
OUT (COAXIAL or
OPTICAL)
or
Coaxial digital cord
(not supplied)
to coaxial or optical
digital input
[Speakers]
Front (L)
Front (R)
A/V Receiver hookup
and
B-1
Centre
55