Changing The Password - Sony DVP-NS57P Operating Instructions Manual

6
Press X/x to select a geographic area
as the playback limitation level, then
press ENTER.
The area is selected.
When you select "OTHERS t," select
and enter a standard code in the table on
page 71 using the number buttons.
7
Press X/x to select "LEVEL," then
press ENTER.
The selection items for "LEVEL" are
displayed.
PARENTAL CONTROL
LEVEL:
STANDARD:
8
Select the level you want using X/x,
then press ENTER.
Parental Control setting is complete.
PARENTAL CONTROL
LEVEL:
STANDARD:
The lower the value, the stricter the
limitation.
To turn off the Parental Control function
Set "LEVEL" to "OFF" in step 8.
To play a disc for which Parental Control is
set
1
Insert the disc and press H.
The display for entering your password
appears.
2
Enter your 4-digit password using the
number buttons, then press ENTER.
The player starts playback.
US
56
z Hint
If you forget your password, remove the disc and
repeat steps 1 to 3 of "Parental Control (limited
playback)." When you are asked to enter your
password, enter "199703" using the number
buttons, then press ENTER. The display will ask
you to enter a new 4-digit password. After you enter
a new 4-digit password, replace the disc in the
player and press H. When the display for entering
your password appears, enter your new password.
• When you play discs which do not have the
Parental Control function, playback cannot be
limited on this player.
• Depending on the disc, you may be asked to
OFF
change the parental control level while playing
OFF
8:
the disc. In this case, enter your password, then
7: NC17
change the level. If the Resume Play mode is
R
6:
canceled, the level returns to the previous level.
5:

Changing the password

1
2
4: PG13
USA
3
4
5
6
If you make a mistake entering your
password
Press C before you press ENTER and input
the correct number.
Notes
Press DISPLAY while the player is in
stop mode.
The Control Menu appears.
Press X/x to select
(PARENTAL CONTROL), then press
ENTER.
The options for "PARENTAL
CONTROL" appear.
Press X/x to select "PASSWORD
t," then press ENTER.
The display for entering the password
appears.
Enter your 4-digit password using the
number buttons, then press ENTER.
Enter a new 4-digit password using the
number buttons, then press ENTER.
To confirm your password, re-enter it
using the number buttons, then press
ENTER.