Sony DVP-NS47P Operating Instructions Manual page 22

7
Press X/x to select the setting that
matches your TV type.
If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 60)
If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 60)
8
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
Is this player connected to an
amplifier (receiver) ? Select the type
of jack you are using.
9
Press X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER.
If you did not connect an AV amplifier
(receiver), select "NO," then go to step
13.
If you connected an AV amplifier
(receiver) using just an audio cord, select
"YES: LINE OUTPUT L/R (AUDIO),"
then go to step 13.
If you connected an AV amplifier
(receiver) using a digital coaxial cord,
select "YES: DIGITAL OUTPUT."
10
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
If your AV amplifier (receiver) has a
Dolby Digital decoder, select "DOLBY
DIGITAL." Otherwise, select "D-PCM."
US
22
YES
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
NO
AUDIO SETUP
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
48kHz/96kHz PCM:
11
Press ENTER.
"DTS" is selected.
AUDIO SETUP
AUDIO DRC:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
48kHz/96kHz PCM:
12
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
If your AV amplifier (receiver) has a
DTS decoder, select "ON." Otherwise,
select "OFF."
13
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
STANDARD
DOLBY SURROUND
ON
D-PCM
D-PCM
DOLBY DIGITAL
STANDARD
DOLBY SURROUND
ON
D-PCM
OFF
OFF
ON