The close-up (Macro) function does not work.
(Twilight mode),
•
mode
.
(page 26)
The date and time are recorded incorrectly.
Set the correct date and time (
•
The F value and shutter speed flash when you press and hold the shutter
button halfway down.
The exposure is incorrect. Correct the exposure (page 30).
•
The image is too dark.
You are shooting a subject with a light source behind the subject. Select the metering mode
•
(page 32) or adjust the exposure (page 30).
The brightness of the screen is too low. Adjust the brightness of the LCD backlight (page 52).
•
Turn on the screen (page 21).
•
The image is too bright.
You are shooting a spotlighted subject in a dark location such as on a stage. Adjust the
•
exposure (page 30).
The brightness of the screen is too bright. Adjust the brightness of the LCD backlight (page
•
52).
The image colors are not correct.
Picture Effect function is activated. Cancel the Picture Effect function (page 36).
•
Vertical streaks appear when you are shooting a very bright subject.
The smear phenomenon is occurring. This phenomenon is not a malfunction.
•
Noise appears in the image when you view the screen in a dark place.
The camera is attempting to increase the visibility of the screen by temporarily brightening
•
the image under conditions of low illumination. There is no effect on the recorded image.
The eyes of the subject come out red.
Set [Red Eye Reduction] in the
•
Shoot the subject at a distance closer than the recommended shooting distance using the flash
•
(
step 5 in "Read This First").
t
•
Light the room and shoot the subject.
(Landscape mode), or
step 2 in "Read This First").
t
(Setup) menu to [On] (page 46).
(Candle mode) is selected for the Scene
79