Troubleshooting - GeekChef VMP-12A User Manual

PROBLEM
Burner does't light
Low flame or gas flow
dropped suddenly
Flames blowout
Flare-up
Flase back

TROUBLESHOOTING

1. Check and to see if your por pane tank is empty.
2. Turn the coupling nut a out one half to three quarters
additional turn until sold stop.Tighten by hand only, please
do not use tools.
3. Clean the burner tube
4. Re engage burner and valve
5. Check steps in assembly instructions.
1. Check your propane tank
2. Turn off gas control know, wait for 1min and light oven.If
the flame still low, turn off gas control know and propane
tank valve.Disconnect and Reconnect regulator and leak
test.Turn on propane tank valve, wait for 30s and then light
the oven.
1. Move oven away from the wind.
2. Refil the propane tank.
1. May grease buildup, please clean oven.
2. May excessive fat in meat, please tirm fats from meat
before cooking.
3. May excessive temperature, please adjust temperature
accordingly.
4. May excess flour on the cooking surface, please clean
there mn at flour from cooking surface.
1. May burner or burner tubes are blocked,
clean burner or burner tubes.
2. May pressure drop duting ingition, please turn off pizza
oven, make sure the tank valve is fully open
SOLUTION
11