Appendix D Relative Bearing Stabilizer (Rbs) - INSIGHT STRIKE FINDER Pilot's Manual

STRIKE FINDER
APPENDIX D
Relative bearing stabilizer (RBS)
Introduction
The Relative Bearing Stabilizer
repositions strike dots, relative to the aircraft heading, during turns. This
is achieved without the Strike Finder having to be slaved to an on-board
compass system —no aircraft compass system needed. The
connected to Strike Finder is all that is required, (see Figure 42).
Description
The RBS is powered through Strike Finder circuitry without additional wiring.
New software algorithms employ data from integrated motion sensors and
data processors to determine heading changes. No field configuration or
calibration is required after factory testing and installation.
Figure 42. External RBS Snaps on Back
Installation
When factory installed, the
the standard Strike Finder housing, (modification "D" and newer units).
58
DIGITAL WEATHER AVOIDANCE
is a plug-in module that automatically
Relative Bearing Stabilizer
RBS
is mounted within
PILOT'S GUIDE