Panasonic ES-RT87 Operating Instructions Manual page 13

2
2
Pressthecleaning
liquidunitremoval
button(1)and
removethecleaning
liquidunit(2).
3
3
Washawaytheoldcleaningliquidandbeard
trimmingsandthenrinsethecleaningliquidunit.
• After washing, be sure to attach the cleaning liquid filter.
4
4
Pourtapwater(1)and
detergent(2)intothe
cleaningliquidunit.
• Do not let the water rise
above the maximum water
line. This may cause the
cleaning liquid to spill.
5
5
Attachthecleaningliquidunit.
• Immediately wipe up any cleaning liquid
that has been spilt.
Be careful not to drop cleaning liquid
onto leather products or wooden floors
as it may cause discoloration.
6
6
Pressthetopoftheself-
cleaningrechargerdownand
securelyattachuntilitclicks.

 
Notes
• The water and detergent will mix after cleaning begins, making
cleaning liquid.
• If "AUTO" mode cannot be selected or the STATUS lamp glows
for 5 seconds when the SELECT button is pressed, the cleaning

liquid needs to be replaced. Replace the cleaning liquid.
• When replaced, the cleaning liquid will last for approximately
30 days if used once per day. (This will differ depending on
beard thickness and the ambient temperature.)
• Use the detergent within approximately 6 months after opening
the package. When 6 months have passed, discard the
cleaning liquid, and then pour new water and detergent into the
cleaning liquid unit.
• Replace the water and detergent at the same time.
Otherwise the cleaning function may deteriorate.
• Only use self‑cleaning recharger detergent for Panasonic shavers.
►Cleaningtheshaver 
Remove any soap or water on the shaver if it has been washed
with hand soap or any other detergent.
1
1
Inserttheappliancepluginto
theself-cleaningrecharger.
2
2
Pullupthearmuntilitclicks.
3
3
Removetheprotectivecap
andthenattachtheshaver.
4
4
Pushdownthearmuntilit
clicks.
5
5
Plugintheadaptorintoahouseholdoutlet.
• Turn the shaver off before attaching.
• Check that the system outer foil is not deformed or
damaged when you are attaching the shaver.
2
4
3
5
1
13