Advertisement
5.3.
SADDLE AND PINS OPERATION fig's 7A & &B
5.4.
V BLOCKS fig's 8A & 8B
5.5.
WORKING TABLE fig.9
6. MAINTENANCE
NOTE: Maintenance and repair must only be carried out by a qualified
person. Contact your Sealey stockist for details.
6.1.
Lubricate all joints and moving parts periodically.
6.2.
Always keep the press clean, dry and protected from harsh conditions.
6.3.
To check hydraulic oil level, open the right hand top cover, and remove
the oil filler plug fig.6.1. If oil needs replacing, use only Sealey hydraulic
jack oil. DO NOT use brake fluid. Contact your local Sealey stockist for
details). Replace oil filler plug and purge system of air.
6.4.
When replacing the hydraulic oil, ensure the piston is fully retracted.
6.5.
If press efficiency begins to drop, purge the system to eliminate any air
from the hydraulic system (see 5.1.).
6.6.
When not in use, clean the press with a damp, soapy cloth. DO NOT use
abrasive or solvent cleaners.
IMPORTANT! Owing to their size and weight, hydraulic products should
ideally be repaired by local service agents. We have service / repair
agents in most parts of the UK. Before returning your product please call
our technical helpline on 01284 757505 for advice and trouble shooting
guidance.
If the product is under guarantee please contact your Sealey stockist.
IMPORTANT: NO RESPONSIBILITY IS ACCEPTED FOR INCORRECT
USE OF THE MACHINE.
Hydraulic products are only repaired by local service agents. We have service/repair agents in all parts of the UK.
DO NOT RETURN PRODUCT TO US. Please telephone us on 01284 757500 to obtain the address and phone number of your local
agent.
If product is under guarantee please contact your stockist.
De-commissioning Product
Should the product become completely unserviceable and require disposal, draw off the oil into an approved container and dispose
of the product and the oil according to local regulations.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 24 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
fig.7A
fig.8A
01284 703534
Original Language Version
fig.8B
sales@sealey.co.uk
fig.7B
www.sealey.co.uk
PPF20S , PPF30S Issue 1 18/02/22
fig.9
Advertisement
