Table of Contents
Advertisement
GETTING STARTED
Step One - Grasp hold of the unit and
open it up by unfolding the screen
upward and with slight incline angle
toward you.
Step Two - Plug the supplied AC
power adapter into standard 110 Volt
outlet and the lightning end into the
input port located on the left side of
system.
Step Three - Locate the physical
power button which is slightly above
the lower right corner along the right
edge. Press power button to power
on.
Step Four – Take a moment to locate
the physical volume buttons which
are slightly to the left of the bottom
right corner, along the bottom edge.
When applicable adjust as needed.
3
Advertisement
Table of Contents
