Loading And Removing An Ink Ribbon Cassette; To Load The Ink Ribbon Cassette - Casio RJA514733-9 Startup Manual

Casio printer rja514733-9
Table of Contents

Advertisement

Loading and Removing an Ink Ribbon Cassette

An ink ribbon cassette is required when printing disc labels.
You should use only the special ink ribbon cassettes that are specified for this printer.
If you plan to print a tape label for a disc case, you need to load a tape cartridge.

To load the ink ribbon cassette

1.
Press
to turn off the printer.
2.
Press the cassette cover release and open the cover.
3.
Remove the stopper from the ink ribbon cassette.
Stopper
4.
If there is slack in the ink ribbon, use your fingers as shown in the illustra-
tion to rotate the spindle of the cassette to remove the slack.
You may need to rotate the spindle several times if there is a lot of slack.
Important!
Never pull on the ink ribbon with excessive force or try to push the ink
ribbon into the cassette.
Loading the ink ribbon cassette while the ink ribbon is slack creates the
risk of malfunction.
Rotate in the direction
of the arrow.
5.
Attach the ink ribbon cassette to the bundled adaptor as shown in the
illustration.
Ink ribbon cassette adaptor
6.
Load the ink ribbon cassette and adapter into the printer.
Make sure that the ink ribbon passes between the print head the rubber
roller as shown in the illustration below. Take care that the ink ribbon does
not snag on the protrusion near the print head. Press down on the ink
ribbon cassette and adaptor until you hear them click securely into place.
Ink ribbon
Protrusion
Important!
Installing the ink ribbon cassette and adaptor incorrectly or failing to
secure them properly in place can cause the ribbon to break.
Make sure these
lines are parallel.
Rubber roller
Ink ribbon
Print head
Make sure these
lines are parallel.
11
E

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cw-l300 - disc title printer b/w thermal transfer

Table of Contents