Inserting The Card - Optimus UMX-EA3 Operating Instructions Manual

5. INSERTING THE CARD

The card occupies one slot on
the matrix.
To insert the card proceed as
follows:
1) Disconnect the power supply
to the unit (POWER SUPPLY 1
and POWER SUPPLY 2 strips).
2) Remove the rear blank plate
for the slot where the card is
to be inserted.
3) Insert the card by fitting it
into the slot guides and
fasten it by means of the
fastening screws.
4) Reconnect the power.
UMX-EA3 version 3.2.000
UMX-EA3
Figure 5
2 Audio inputs card
7