Sharp CD-G10000 Operation Manual page 28

MP3 navigation (only for MP3 files) (continued)
CD-G10000
CP-G10000S
Character search (for folder or title 1/2/3)
By entering a name, you can search files by folder or title 1/2/3
within one MP3 disc.
1
Perform steps 1 - 3 in "File search (by folder or title 1/2/3)"
on page 27.
2
Press the MP3 NAVIGATION button.
3
Press the , , or
lect "FOL", "T-1", "T-2" or "T-3".
To search files by folder name, se-
lect "FOL" (will flash).
4
Press the CHARACTER button for 2 seconds.
The display will be ready for editing characters.
1st row: String table
2nd row: Input editor (8 digits)
5
Press the or button to select the desired alphabet.
Press the or
display.
6
Press the CHARACTER button and the active character will
be entered in the 2nd row of the display.
To delete an entered character, move the cursor to the charac-
ter with the or button and press the CLEAR/DIMMER but-
ton on the remote control.
7
Repeat steps 5 and 6 to enter characters.
In the folder (or title) name search, you do not have to enter the
full name. The unit searches for names beginning with the en-
tered characters.
28
button to se-
Folder Title 1
Title 2 Title 3
button to go to the next page of character
8
When finished, press the ENTER button. The unit searches
for the same name within folders (or titles).
If the search word is not in the folder (or title) name, "NOT
FOUND" appears and the menu returns.
9
Use the or button to scroll and select a folder (or title).
10
Press the / button to start playback.
All files in the selected folder (or title) are played, and the previ-
ous display returns.
To exit the MP3 navigation mode:
In the stop mode, press the button.
Notes:
The unit searches regardless of the case, and found names
appear in uppercase.
Some symbols do not appear properly.
Character entry with direct buttons:
The direct buttons on the remote
control can also be used for charac-
ter entry.
In step 5 on the left, use buttons 0 -
9 to enter alphabets.
Alphabet types change as you press
a button.
For example, press "2" four times to enter "C".
2 A B C
Characters:
1 2 ABC 3 DEF 4 GHI 5 JKL 6 MNO 7 PQRS 8 TUV 9 WXYZ
: indicates a space.
0