Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for C4i HDC-EHB70ARC
Summary of Contents for C4i HDC-EHB70ARC
- Page 1 18Gbps HDBaseT Extender (70m) with ARC VER 1.0...
-
Page 2: Table Of Contents
Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. -
Page 3: Introduction
1. Introduction This 18Gbps HDBaseT Extender can extend HDMI signal, bi-directional IR control signal, ARC signal and RS-232 control signal to a distance up to / 230ft via a single CAT5e/6 cable. This product converts HDMI signal to standard HDBaseT signal and transmits it through LAN cable. It can easily control signal source device or display device from the remote end through bi-directional IR signal pass-through function. -
Page 4: Package Contents
3. Package Contents ① 1 x 18Gbps HDBaseT Extender (Transmitter) ② 1 x 18Gbps HDBaseT Extender (Receiver) ③ 1 x IR Blaster cable (1.5 meters) ④ 1 x IR Wideband Receiver cable (1.5 meters) ⑤ 2 x 3pin-3.81mm Phoenix Connectors (male) ⑥... - Page 5 Connection Input: 1×HDMI IN [TypeA, 19-pin female] Output: 1×HDBT OUT [RJ45] 1×SPDIF OUT Transmitter Control: 1×RS-232 [3pin-3.81mm Phoenix connector] 1×SERVICE [Micro-USB jack] 1×IR IN [3.5mm Stereo Mini-jack] 1×IR OUT [3.5mm Stereo Mini-jack] Input: 1×HDBT IN [RJ45] 1×SPDIF IN Output: 1×HDMI OUT [TypeA, 19-pin female] Control: 1×RS-232 [3pin-3.81mm Phoenix connector] Receiver 1×SERVICE [Micro-USB jack]...
-
Page 6: Operation Controls And Functions
5. Operation Controls and Functions 5.1 Transmitter Panel COPY SERVICE EDID RS-232 HDMI IN DC 24V SPDIF OUT IR IN IR OUT Name Function Description Power LED The red LED is on when the Transmitter is powered on. Used for audio EDID setting (dial to COPY by default). EDID DIP COPY: Copy the EDID of the HDMI OUT port of Receiver. -
Page 7: Receiver Panel
Name Function Description SPDIF OUT Optical fiber audio signal output port. Connect to IR receiver cable, the IR receive signal will emit IR IN to the IR OUT port of the Receiver. Connect to IR blaster cable, the IR emit signal is from the IR IR OUT IN port of the Receiver. - Page 8 Name Function Description Firmware update port. SERVICE DC 24V/1A power input port. Note that the extender supports POC function, it means that either DC 24V Transmitter or Receiver is connected to 24V/1A power supply, the other doesn’t need power supply. RJ45 connector for connecting the HDBT OUT port of HDBT IN Transmitter with CAT6/6a cable.
-
Page 9: Ir Pin Definition
5.3 IR Pin Definition IR Receiver and Blaster pin’s definition is as below: IR RECEIVER IR BLASTER IR Blaster IR Blaster Signal Power IR Receiver IR Signal Power Grounding Note: When the angle between the IR receiver and the remote control is ± 45 °, the transmission distance is 0-5 meters;... -
Page 10: Application Example
6. Application Example COPY SERVICE EDID Transmitter RS-232 HDMI IN DC 24V SPDIF OUT IR IN IR OUT Power Supply DVD or Blu-ray HDMI Matrix with IR Blaster Audio Amplifier Player RS-232 function IR Receiver CAT5e/6 cable UHDTV IR Blaster IR Receiver RS-232 HDMI OUT...