Advertisement
Thank you for choosing our additional lighting for the Omegon polarscope. Please read this manual carefully so
that you can carry out the relatively simple steps without errors.
The additional lighting brightens up the light output of your polarscope, which means that you can see the
black image of the viewfinder even in pitch black nights. It consists of a dimmable red LED light which is
projected via light conductors into the centre of the beam path. The best thing about this additional light is
that it can be used on the Skywatcher EQ3-2, EQ5, Celestron AVX (without O-ring), as well as on the Meade
LX85 mounts. It is therefore a unique, multi-purpose device.
Application – Operation with Omegon MiniTrack.
1.
The Omegon polarscope additional lighting can be connected to the EQ-500 polarscope, or any other
comparable polarscope (⌀ 17.5mm).
To do this, the polarscope must be inserted at the rear end, i.e. the area with the three grub screws.
Before doing this, make sure that the grub screws do not protrude into the socket of the additional
lighting device. Then tighten the grub screws very slightly without exerting pressure, as this is
perfectly sufficient to ensure a secure grip.
Fig.2
Reproducing the contents of this document in whole or in part for purposes other than private use is expressly prohibited in any form.
Subject to changes and errors. All texts, images and marks are the property of nimax GmbH.
Fig.1
Grub screws
2/4
Advertisement
