Advertisement
Hints:
Hexagon grub screw
Specification:
Dimensions:
Power:
- To get a perfect rewinded roll when printing batches of labels some points are
suggested
if possible. However the rewinder
- In printers Setup use no "negative startadjust". This will avoid retracting the
label before printing.
- Check also in the Setup with Normal speed if printer still stops for each label.
Bobbin length,
Label roll size,
Bobbin paper core size
L
W
H
Weight
Supply the Rewinder from separate adapter either
18V/DC 15W, 800mA or 24V DC.
(2 pole female chassi plug, length 12mm, outer 5,5mm, inner 2.1mm)
Powering from printer is not recommended.
RW-91 – Service Manual
makes a good job without these proposals.
Bobbin
125mm
38-180mm
38-42mm
180mm
210mm
200mm
1.4kg
Advertisement
