Table of Contents
Advertisement
31/01/2022, 19:00
LAN Access Ports
The MR36H features 3x LAN ports labeled 1 through 3. Port 1 may provide 802.3af out to an end device if the
MR36H is powered via a 802.3at power source. Con guration details can be found in the
article.
The LAN ports on an MR36H behave like access ports on a switch, and will not accept incoming traf c if it has a
VLAN (802.1q) tag applied.
Connecting another MR to the LAN ports of the MR36H is not a supported topology.
Through MR-4072 we learnt that if another MR is connected to the LAN port of an MR36H, DHCP requests
from that MR will not be forwarded from the LAN ports, this is designed as such to prevent erroneous mesh
How can we help you?
topologies from forming.
https://documentation.meraki.com/MR/MR_Installation_Guides/MR36H_Installation_Guide
MR36H Installation Guide - Cisco Meraki
AP port pro les
5/21
Advertisement
Table of Contents
