Download Print this page

WilTec 62316 User Manual page 3

Workshop tool cart with 3 trays

Advertisement

Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
Only use the cart properly. Using the cart improperly increases the danger of injuries.
Do not use the cart in case it is damaged.
Do not exceed the maximum capacity (50 kg per tray, 150 kg in total).
Do not climb or stand on the cart.
Keep children away from the cart.
Only place the cart onto a solid surface to avoid that it tips over.
When parking the cart, make sure that its brakes are applied to avoid that it rolls away acci-
dentally.
Do not modify the cart in any way.
Only use original spare parts.
Assembly
1.
Fix the rolls to the base plate with the help of the screws and washers. Make sure that the rolls
provided with brakes are fixed to the front part of the cart and the rolls without brakes to the rear
part.
2. Attach the outer sides of the cart to the base plate.
3. Fix the other drawers to their appropriate spots.
4. At last, fix the handle to the right outer side.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 62316
Page 3
12 2021-1

Advertisement

loading