Advertisement
Advertisement
Table of Contents
Related Manuals for ML Accessories EMRUN
Summary of Contents for ML Accessories EMRUN
- Page 1 INSTALLATION & MAINTENANCE MANUAL EMRUN...
- Page 2 These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following product: EMRUN SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations.
- Page 3 move the two screws on the end of the product (see Fig. 1) and remove the end cap and legend move the two screws on the end of the product (see Fig. 1) and remove the end cap and legend Remove the two screws on the end of the product (see Fig.
- Page 4 Fig. 4 switched-maintained • Connect the battery to the battery connector on the PCB Fig. 4 switched-maintained • Slide the legend back into the fitting and refit the end cap Connect the battery to the battery connector on the PCB •...
- Page 5 If this product should fail within its warranty period, it should be returned to the place of purchase for a free of charge replacement. ML Accessories does not accept responsibility for any installation costs associated with the replacement product. Your statutory rights are not...
- Page 6 TESTING FOR EMERGENCY LUMINAIRES Recommended routine test procedure in accordance with BS5266 • Daily check – check LED charge indicator is illuminated • Monthly functional test - simulate a mains supply failure for approx. 30 seconds by operation of key switch or switching off circuit breaker.
- Page 7 230V 50Hz, IP20, Class 1, non-Dim, house, Ta 0~45...
- Page 8 INTERNAT CONTACT D INTERNATIONAL CONTACT DETAILS 45°C ML Accessories Limited LU5 4LT www.mlaccessories.co.uk DCSEP21_V2...
Need help?
Do you have a question about the EMRUN and is the answer not in the manual?
Questions and answers